LED Dimmer

Channels 4Χ5Α or 4Χ10Α
12-36VDC
Supports RGBW
Unique property: Cyclical color change by using a simple 4-bits dim object
Automatic eye-curve correction to maintain the same color through the whole dimming range
Short circuit, overload and overheat protection with auto recovery
Channel bundling possible for any number of channels

(For test partners only)

LED Dimmer

(For test partners only)

Channels 4Χ5Α or 4Χ10Α
12-36VDC
Supports RGBW
Unique property: Cyclical color change by using a simple 4-bits dim object
Automatic eye-curve correction to maintain the same color through the whole dimming range
Short circuit, overload and overheat protection with auto recovery
Channel bundling possible for any number of channels

CADDX – KNX Interface

Used to connect Caddx –NX alarm systems to the KNX Bus
Supports 64 zones
Transfers the alarm display contents, the alarm leds and the zone and partitions status to the KNX
Transfers to the alarm, commands for alarm usage and arm/disarm

PARADOX – KNX Interface 64 Zones

Used to connect Paradox –EVO alarm systems to the KNX Bus
Supports 64 zones
Transfers the alarm leds and the zone and partitions status to the KNX
Transfers to the alarm, commands for alarm usage and arm/disarm

PARADOX – KNX Interface 192 Zones

Used to connect Paradox –EVO alarm systems to the KNX Bus
Supports 192 zones
Transfers the alarm leds and the zone and partitions status to the KNX
Transfers to the alarm, commands for alarm usage and arm/disarm

PARADOX – KNX Interface 64 Zones V1.2A

Used to connect Paradox –EVO alarm systems to the KNX Bus
Supports 64 zones
Transfers the alarm leds and the zone and partitions status to the KNX
Transfers to the alarm, commands for alarm usage and arm/disarm

Now it is easy to Arm/Disarm the alarm panel using only 1 bit telegram.
Or to choose Arm, Stay, Force, Instant by a 1 byte telegram
Same group address supports both 1 bit and 8bits telegram
Get arm/disarm feedback and know exactly if it is Arm,Stay,Force,Instant

PARADOX – KNX Interface 192 Zones V1.2A

Used to connect Paradox –EVO alarm systems to the KNX Bus
Supports 192 zones
Transfers the alarm leds and the zone and partitions status to the KNX
Transfers to the alarm, commands for alarm usage and arm/disarm

Now it is easy to Arm/Disarm the alarm panel using only 1 bit telegram.
Or to choose Arm, Stay, Force, Instant by a 1 byte telegram
Same group address supports both 1 bit and 8bits telegram
Get arm/disarm feedback and know exactly if it is Arm,Stay,Force,Instant

Check the new PBI software V.1.2A

Now it is easy to Arm/Disarm the alarm panel using only 1 bit telegram.

Or to choose Arm, Stay, Force, Instant by a 1 byte telegram
Same group address supports both 1 bit and 8bits telegram

Get arm/disarm feedback and know exactly if it is Arm,Stay,Force,Instant

The new serial alarm software supports only PBI firmware Version 1.2A. It can run to all PBI64 after a firmware upgrade.

Firmware 1.2A has a symbolic fee and can be obtained by sending an e-mail to [email protected]